- In-Store Pickup
Everyday from 9 AM to 7 PM
- ARAMEX Shipping
2-3 Days
Total fees when checkout
CP2102 USB to TTL Converter
Your data is always protected
Sale_coupon_15
115.00EGP
In stock
In stock
Everyday from 9 AM to 7 PM
2-3 Days
Total fees when checkout
Payment Methods:
This CP2102 UART module is a USB to TTL UART Converter module which is based on CP2102 Bridge by SiLabs. This CP2102 UART module is compliant with USB2.0 full-speed devices with an integrated transceiver. The USB function controller manages all data transfers between the USB and the UART as well as command requests generated by the USB host controller and commands for controlling the function of the UART. The USB Suspend and Resume signals are supported for power management of both the CP2102 device as well as external circuitry..
Pin Name | Description |
VCCIO | Jumper Configurable VCC (3.3v or 5v) Out Pin |
GND | Ground |
PWR LED | Power Indicator LED |
TxD | Asynchronous data output (UART Transmit) |
Tx LED | UART Transmit (data out) Indicator LED |
RxD | Asynchronous data input (UART Receive) |
Rx LED | UART Receive (data in) Indicator LED |
RTS | Ready to Send control output (active low) |
CTS | Clear To Send control input (active low) |
GND | Ground |
Device Reset. The open-drain output of internal POR or VDD monitor. An external source can initiate a system reset by driving this pin low for at least 15 μs. | |
This pin is driven low when the CP2102/9 enters the USB suspend state. | |
SUSPEND | This pin is driven high when the CP2102 enters the USB suspend state |
RI | Ring Indicator control input (active low) |
DCD | Data Carrier Detect control input (active low) |
DTR | Data Terminal Ready control output (active low) |
DSR | Data Set Ready control input (active low) |
Package Includes:
Documents:
Related Products:
No account yet?
Create an Account